Heavy-duty design built for the jobsite. This Thermostatically controlled Heatstar 170,000 BTU Propane Forced Air Heater comes with a standard 20ft hose, regulator and all the safety you would expect of a Heatstar product. Equipped with factory installed high limit switch and continuous solid state ignition, you can feel comfortable using this heater on any jobsite. Just plug the heater into a 110v outlet, then hook up the included hose and regulator to a 100lb propane tank or larger and you are ready to take the chill out of any job.
- 125,000 – 170,000 BTU per hour
- For use with propane gas
- Heats up to 4,000 sq.ft
- Rugged and durable steel construction
- Economical, efficient and clean burning
- Heavy duty high output fan
- Hose and regulator included
- 100 lb. propane tank is required
| Specifications | |
| Weight | 26.1 |
| Fuel Type | Propane |
| Minimum LP Tank Size | 100lb |
| Minimum NG Line Size | Not Applicable |
| Electrical Rating | 115V / 3 AMP |
| Air Volume (CFM) | 450 |
| Gas Inlet Connection | 3/8in |
| Gas Inlet Pressure Min | 28in WC (Regulator out) |
| Clearance to Combustibles: Horizontal | Outlet 6ft; Sides 2ft; Top 3ft |
| Duct Length Max | Not Applicable |
| Duct Diameter | Not Applicable |
| Multiple Ducting Optional | Not Applicable |
| Wheel Type | Not Applicable |
| Thermostat Optional | Yes |
| Item Length (in) | 11.5 |
| Item Width (in) | 26.5 |
| Item Height (in) | 16.5 |
| Item Weight (lb) | 31.16 |








Reviews
There are no reviews yet.